OPTIFLEX BACNET ROUTERS & INTEGRATORS
The Automated Logic® OptiFlex™ BACnet Integrator is an integral component of the WebCTRL® building automation system.
The OptiFlex Integrator supports routing between multiple BACnet networks. It also supports custom control programs to easily integrate with third party BACnet or Modbus equipment such as variable speed drives, boilers, and lighting.
OPTIFLEX BACNET BUILDING CONTROLLER
The Automated Logic® OptiFlex™ BACnet Building Controller is a high-performance, BACnet native direct digital controller and router.
As a component of the WebCTRL® building automation system, this controller provides comprehensive control of connected equipment. The OptiFlex BACnet Building Controller provides the speed, power, memory, and I/O flexibility needed for the most demanding control applications in the industry. Capable of controlling multiple pieces of HVAC equipment simultaneously, this robust BACnet controller can support complex control strategies.
The Automated Logic® SE controllers are an integral component of the WebCTRL® building automation system.
The SE controllers are fully programmable, native BACnet Advanced Application Controllers that provide a rugged solution for single-equipment applications. Designed to operate in a wide range of environmental conditions, SE controllers can be used inside rooftop units, mechanical rooms, equipment closets, or almost any other weather- tight location.
The ZN341A is used for zone control.
It has a built-in flow sensor and detachable actuator, uses a patented flow control algorithm, and mounts directly on the VAV terminal damper shaft. You can disconnect the actuator from the controller and mount them separately, connecting them with just the actuator cable or using an additional extension cable, up to a maximum distance of 300 feet.
AMR & EQUIPMENT PORTAL
The ARCNET to MS/TP Router (AMR), is an integral component of the WebCTRL® building automation system. The AMR allows you to add a BACnet MS/TP network to an ARCNET 156 kbps network.
EQ-PRTL is a powerful gateway to a single piece of equipment /device using proprietary or open protocols such as Modbus and LonWorks. Support for BACnet® over ARCNET 156 kbps and MS/TP communications are standard.
ZS2 LINE OF ZONE ZENSORS
The Automated Logic® ZS room sensors are an integral component of the WebCTRL® building automation system.
These sensors provide the function and flexibility you need to manage the conditions important to the comfort, productivity, and sustainability of your facility, and are designed to work with ZN, SE, and ME line controllers. The ZS sensors measure room temperature, relative humidity, carbon dioxide, motion and VOCs (volatile organic compounds), and are available in a variety of zone-sensing combinations to address your specific control requirements.
Ideal for controlling central plants, air handlers, and rooftop units OptiFlex BACnet Building Controllers provide the speed, power, memory, and I/O flexibility needed for the most demanding control applications in the industry.
Capable of controlling multiple pieces of HVAC equipment simultaneously, this robust BACnet controller can support complex control strategies.
EATON H-MAX VFDS
The H-Max series of variable frequency drives are designed to HVAC market requirements for fan, pump, and fluid control application.
The patented energy savings algorithm, high short circuit current rating and intuitive user interface provide customers an energy efficient, safe, and easy-to-use solution for your adjustable frequency drive needs.
BELIMO ENERGY VALVE
The Belimo Energy Valve is an IoT cloud-connected pressure independent valve that monitors coil performance and energy consumption while maintaining Delta T.
It also has an exclusive glycol monitoring feature providing accurate, repeatable flow measurement, and ensuring glycol content meets design requirements. The Energy Valve has a patented Power Control and Belimo Delta T ManagerTM logic built in to monitor coil performance and optimize the available energy of the coil by maintaining Delta T. In addition to the standard analog signal and feedback wiring, it communicates its data to the Building Management System (BMS) via BACnet MS/TP or BACnet IP as well as Modbus RTU and Modbus TCP/IP.
CHILLED WATER SYSTEM OPTIMIZER
The Automated Logic® chilled water system optimizer is a sophisticated, scalable, native BACnet optimization solution for chilled water plants.
The chilled water system optimizer minimizes the energy use of the entire chilled water system, up to and including air handling units and other water side chilled water consumers. By providing optimized control of the chilled water and condenser water setpoints, the chilled water system optimizer can lower energy costs while also maintaining occupant comfort levels in the building. The chilled water system optimizer solution consists of a self-adapting control algorithm packaged in an application specific Automated Logic controller.
Ruggedized, Panel-Mounted Unitary HMI
The Automated Logic® OptiPoint™ equipment interfaces, available in three sizes, are ruggedized panel-mount HMI that provide technicians easy access to the equipment status, parameter values, schedules, alarms, and trends.